Showing 1 to 20 of 36 results

  • The Federation Enclave has a huge selection of Autonomous weapons and this is just three of the most common versions used by the different groups of their military. This set comes with all the parts necessary to assemble three different styles of Autonomous Ball Drones, (Dual Gun Drone, Protective Shield Drone, and the Target Acquisition Drone) with optional arm styles to give your drones some variety on the battlefield. Drones may be mounted on standard miniature flight stands via a predesigned 1/8 inch hole in the bottom of the model.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on June 1, 2022

    $3.00

  • The Heavy Battle Suit is a perfect proxy for command battle suits or heavily armed elite battle suits in your favorite tabletop games. This set comes with 54 parts to make near endless variations of the Heavy Battle Suit and is extremely posable.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on June 1, 2022

    $6.00

  • The First Federation Enclave Suit to be released is a perfect proxy for your high speed commander battle suits in your favorite table top games. This kit comes with tons of options and is highly posable. This kit contains 48 parts for near limitless combinations and includes a 60mm scenic base to show off your commander on the battlefield.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $6.00

    Released on May 1, 2022

    $6.00

  • These smaller suits are perfect proxies for your favorite table top sneaky battle suit units. Kit comes with 27 different parts to allow almost endless combinations of poses. Provided with both arm and backpack mounted weapons to suit your personal taste.

    All parts are presupported and include Lychee files.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $4.00

    Released on May 1, 2022

    $4.00

  • The forces of the Ze'on sept will soon bring their weapons to war, and not for any good greater than their own. This multi part poseable battle suit model kit will fill your needs for any crisis, no matter it's role. Parts are scaled to fit standard tabletop anime style battle suits and fit well on a standard 50mm bases as shown in the pics. This kit comes with 54 parts that can be mixed and matched for different mecha styles and weapon loadouts. 7 different types of guns in hand or back mount styles, plus melee knuckledusters and more.

    Released on April 1, 2022

    $7.00

  • The Challengers are members of the Daughters of Wolves that have failed a challenge of some kind and have to earn their right to fight along side their sisters once more. These six models are scaled to fit your favorite table top games and includes a separate sword file to serve your kit bashing needs. This kit is released as part of the welcome pack for 2022 on our Patreon, and the range will be expanded every few months to include more Daughters.

    Released on March 9, 2022

    $5.00

  • Spider Tanks are not just for animes and fish people now. This Spider Tank has filled it's chamber with souls and has been heavily defiled.

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Files come in Lychee supported files noted a .lys. Supported stl files are noted with the supported word at the end of the file name. All other files are unsupported. If you use another slicer other than Lychee, please note that the larger parts need to be hollowed and that you will have to use your software's hole tools to make appropriate drain holes for the models in order for the resin to escape. I highly recommend the use of the Lychee slicer software. Even the free version will open the .lys files and works extremely well.

    Released on March 1, 2022

    $10.00

  • The 40mm Scale Storage Building is a quick vasemode print terrain feature for your games such as MCP and others, that includes removable trays for storage of your MCP tokens dice and tactic cards. Made using FDM vase mode techniques to reduce printing time to just a few hours and with minimal filament usage. Kit includes all of the parts necessary to make the model shown in the pictures as well as two alternate faces for your building, and the Cura profile necessary to slice your files.

    Check our my other VMT models like the townhouse in the picture, on my patreon or my stores https://linktr.ee/leesedrenfort or https://www.patreon.com/LeesedRenfort

    This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
    This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
    Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
    cura profile for an ender3 is also included in the download.
    This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
    Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Feb. 21, 2022

    $4.00

  • The Abyssal Wyvern is a combination of mechana parts and the bones of an elder beast fused together with infernal powers to create a thing that should not exist. It takes flight on tattered wings and burns it's enemies alive as it passes overhead.

    This model is perfectly scaled to fit your favorite tabletop games, and I have even made a couple of base options you can use for free that you can find here.

    https://www.thingiverse.com/thing:5206309

    https://www.thingiverse.com/thing:5206300

    This model is an extremely poseable multipart kit that will allow you to make endless action scenes. All parts are pre-supported and tested multiple times for your convenience.

    I hope you enjoy it as much as I enjoyed making it. Please show me your paint jobs once you are done.

    Released on Feb. 1, 2022

    $10.00

  • Great for adding terrain quickly without using many resources, and perfect for setting up tourney tables on a budget. The parts in this kit can be printed in less than 11 hours total print time and only 181 grams of filament.

    Check our my other VMT models like the townhouse in the picture, on my patreon or my stores https://linktr.ee/leesedrenfort or https://www.patreon.com/LeesedRenfort

    This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
    This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
    Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
    cura profile for an ender3 is also included in the download.
    This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
    Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    Released on Jan. 7, 2022

    $3.00

  • The Savage Automaton is yet another machine of madness for your tabletop games. This model is printed out as a multipart kit with pre-supported parts and lychee files for easy adjustment of the supported files. The model is approximately 215 mm tall, making in an enormous lord of war. I hope you enjoy this model and check out the future releases at www.patreon.com/leesedrenfort

    Files come in Lychee supported files noted a .lys. Supported stl files are noted with the supported word at the end of the file name. All other files are unsupported. If you use another slicer other than Lychee, please note that the larger parts are hollowed and that you will have to use your software's hole tools to make appropriate drain holes for the models in order for the resin to escape. I highly recommend the use of the Lychee slicer software. Even the free version will open the .lys files and works very well. I have included Hollowed versions of the 3 large body parts for use in other slicer programs, but I do not guarantee their use in other programs, these parts have only been provided for your convenience.

    Released on Jan. 1, 2022

    $10.00

  • The Daughter of Wolves cult is a silent order that protects the Empire from things that should never be spoken of. This set contains 5 stl file poses for the Daughter of Wolves Blade Maidens, supported files, and Lychee files for 3d printing. This kit is released as part of the welcome pack for 2o22 on our Patreon, and the range will be expanded every few months to include more Daughters.

    Released on Nov. 18, 2021

    $5.00

  • The Noble Widower is a unique machine of madness for your tabletop games. This model is printed out as a multipart kit with pre-supported parts and lychee files for easy adjustment of the supported files. The model is approximately 170mm tall 180mm wide and 190mm long, making in an enormous lord of war. I hope you enjoy this mode and check out the future releases of my machines of madness.

    Files come in Lychee supported files noted a .lys. Supported stl files are noted with the supported word at the end of the file name. All other files are unsupported. If you use another slicer other than Lychee, please note that the larger parts are hollowed and that you will have to use your software's hole tools to make appropriate drain holes for the models in order for the resin to escape. I highly recommend the use of the Lychee slicer software. Even the free version will open the .lys files and works very well. I have included Hollowed versions of the 3 large body parts for use in other slicer programs, but I do not guarantee their use in other programs, these parts have only been provided for your convenience.

    Alternative larger shoulderpads have been added to the file. I hope you enjoy.

    Released on Nov. 18, 2021

    $10.00

  • This kit contains all the parts necessary to make 18 variations of 2pi K Radical Xenos Mercs for your SciFi table top games.

    All parts are presupported and include Lychee files.

    I hope you enjoy this kit. Please see my latest models each month at https://www.patreon.com/leesedrenfort

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $10.00

    Released on Nov. 1, 2021

    $5.50

  • This kit contains all the parts necessary to make the Pilots as part of a collaboration with Piper Makes' Narwhal kit which can be found at https://comicsgamesandthings.com/shop/product/narwhal-heavy-weapons-platform/

    All parts are presupported and include Lychee files.

    I hope you enjoy this kit. Please see my latest models each month at https://www.patreon.com/leesedrenfort

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $10.00

    Released on Nov. 1, 2021

    $4.00

  • MSRP $10.00

    Released on Nov. 1, 2021

    $4.00

  • MSRP $5.00

    Released on Oct. 1, 2021

    $4.00

  • Greatest of the Madness Demons the Berator model is a huge centerpiece for your tabletop games.

    All parts are pre-supported and include Lychee files. Some larger parts may require you to make holes using your slicer software, in the larger parts in order for drainage, if you are not slicing the files in the Lychee software. Please make note that if drain holes are not made the model will crack.

    This model includes the scenic base shown provided by Crucible of Games patreon.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially

    MSRP $10.00

    Released on Oct. 1, 2021

    $9.00

  • Gnarr, the strongest of the Madness Demons is a beautiful centerpiece for your tabletop games.

    All parts are pre-supported and include Lychee files. Some larger parts may require you to make holes using your slicer software, in the larger parts in order for drainage, if you are not slicing the files in the Lychee software. Please make note that if drain holes are not made the model will crack.

    This model includes the scenic base shown provided by Crucible of Games patreon.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $10.00

    Released on Oct. 1, 2021

    $8.50

  • Vehemence, the most rage filled of the Madness Demons is a beautiful centerpiece for your tabletop games.

    All parts are pre-supported and include Lychee files. Some larger parts may require you to make holes using your slicer software, in the larger parts in order for drainage, if you are not slicing the files in the Lychee software. Please make note that if drain holes are not made the model will crack.

    This model includes the scenic base shown provided by Crucible of Games patreon.

    Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

    Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

    MSRP $10.00

    Released on Oct. 1, 2021

    $8.50

Showing 1 to 20 of 36 results

items per page

Show filters